• Sensitivity :
  - 100 mV/In/Sec or 4 mV/mm/Sec ±10%.
  - 500 mV/In/Sec or 20 mV/mm/Sec ±10% (version 500)
• Frequency response: 2 Hz - 6 kHz (±3 dB)
• Measuring range :
  - 40 In/Sec or 1.6 mm/Sec
  - 10 In/Sec or 0.4mm/Sec (version 500)
• Response time: 1 second
• Operating Temperature : -55 to 140°C
• Exit :
  - On top of the sensor (CMCP 793V)
  - On the side (CMCP 797V)
• Material: Stainless steel
• Connector: 2-pin MS
• Mounting: 1/4-28 UNF and M8x1,25 included
• Weight: 125g (CMCP 793V) / 185g (CMCP 797V)
• Technology: Piezoelectric shear technology
• Protections: IP68

• Shear Baem load cell for the measurement of static and dynamic loads.
• Measuring Range: 0 to 350 Kg, ..., 7.5 Tons. 
• Material: Stainless Steel. 
• Approval: OIML R60. 
• Class: C2 & C3.
• Environmental protection: IP68. 
• Output: 2mV/V.

• Bending Baem load cell for the measurement of static and dynamic loads.
• Measuring Range: 0 to 10 Kg, ..., 2 Tonnes. 
• Material: Stainless Steel. 
• Approval: OIML R60. 
• Class: C2 & C3.
• Environmental protection: IP68. 
• Output: 2mV/V.

• Sensitivity :
  - 100 mV/g ±10
  - 10 mV/°C from 0 to 100°C (version 760TT)
• Frequency response: 0.8 Hz - 15 kHz (±3 dB)
• Measuring range: ±80 g, peak
• Response time: 1 second
• operating temperature : -55 to 150°C
• Material: Stainless steel
• Output: X, Y and Z (+ temperature output version 760TT)
• Connector: 5-pin M12
• Mounting: 1/4-28 UNF and M8x1,25 included
• Weight: 185g
• Technology: Piezoelectric shear technology
• Protections: IP67

• Professional Digital Indicator with 1 (standard)or 2 (option) inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output, PT100, potentiometer, ENCODER and LVDT. 
• High accuracy (±0.005%). 
• 2.55 to 4800 sample per second selectable rate.  
• OPTIONS : One or two Analog Outputs programmable,  serial RS232, serial RS485 line with protocol MODBUS RTU, WIRELESS transmission, A DATALOGGER.

• Sensitivity: 100 mV/g ±10%.
• Frequency response: 0.32 Hz - 10 kHz (±3 dB)
• Measuring range: ±50 g, peak
• Response time: 2.5 seconds
• operating temperature : -54 to 85°C
• Material: Aluminum
• Output: X, Y and Z + temperature output
• Connector: 4-pin 8SL
• Mounting: 1/4-28 UNF and M8x1,25 included
• Weight: 85g
• Technology: shear ceramic
• Protections: IP67

• Weighing unit for load cell SMF1. 
• Measuring Range: from 0 to 2.5, ..., 200 Kg. 
• Material: Stainless Steel. 
• Elastomer bearing against vibrations.

The Wheel / Lever Operated Spring Tester is ideal for measuring compression or tension springs. The spring tester offers precise control through hand wheel operation. The tester measures both compression and tension and is equipped with an optional digital distance meter. Any system with a digital force gauge can be connected to a PC for data output. Imada force gauges are available in capacities of a few ounces up to 1,100 lbf. Consult our engineers for custom applications.

• Sensitivity :
  - 100 mV/g ±5% per axis
• - 10 mV/°C from 0 to 100°C
• Frequency response: 0.32 Hz - 15 kHz (±3 dB)
• Measuring range: ±80 g, peak
• Response time: 1 second
• operating temperature : -54 to 85°C
• Material: Stainless steel 316L
• Output: X, Y and Z + temperature output
• Connector: 5-pin M12
• Mounting: 1/4-28 UNF and M8x1,25 included
• Weight: 189g
• Technology: Piezoelectric in shear
• Protections: IP67

• Bending Baem load cell for the measurement of static and dynamic loads.
• Measuring Range: 0 to 25, ..., 200 Kg. 
• Material: Stainless Steel. 
• Approval: OIML R60. 
• Class: C2 & C3.
• Environmental protection: IP68. 
• Output: 2mV/V.

• Sensitivity: 100 mV/g ±10%.
• Frequency response: 0.8 Hz - 19 kHz (±3 dB)
• Measuring range: ±80 g, peak
• Response time: 1 second
• Operating temperature : -55 to 130°C
• Material: Stainless steel 316L
• Exit :
  - Top of sensor (CMCP 770A)
  - On the side of the sensor (CMCP 780A)
• Connector: 2-pin MS 5015
• Mounting: 1/4-28 UNF and M8x1,25 included
• Weight: 52g 770A version / 135g 780A version
• Technology: Piezoelectric in shear
• Protections: IP68

• Sensitivity:
  - 100 mV/g ±5%
  - 10mV/°C from 0 to 100°C (temperature output version only)
• Frequency response: 0.32 Hz - 10 kHz (±3 dB)
• Dynamic range: ±50 g, peak
• Setting time: 2 seconds
• Temperature range: -54 to 85°C
• Material: Stainless steel 316L
• Connection: 3-pin M8
• Weight: 70.7g
• Technology : Piezoelectric in shear
• Protection: IP68

• Sensitivity : 100 mV/g ±5%.
• Frequency response : 0.32 Hz - 10 kHz (±3 dB)
• Dynamic range : ±50 g, peak
• Setting time : 2 seconds
• Temperature range : -54 to 85°C
• Material : Stainless steel 316L
• Output : On top of the sensor
• Wiring : FEP jacketed cable (200°C) 
• Mounting : 1/4-28 UNF included
• Weight : 70.7g
• Technology : Piezoelectric in shear
• Protection : IP68

• Sensitivity:
  - 100 mV/g ±5%
  - 10mV/°C from 0 to 100°C (temperature output version only)
• Frequency response: 0.32 Hz - 10 kHz (±3 dB)
• Dynamic range: ±50 g, peak
• Setting time: 2 seconds
• Temperature range: -54 to 85°C
• Material: Stainless steel 316L
• Exit :
  - On top of the sensor (CMCP 1100)
  - On the side of the sensor (CMCP 1100-S/1100-SR)
• Wiring: TPE jacketed cable (optional stainless steel shielding) 
• Mounting: 1/4-28 UNF included
• Weight: 70.7g
• Technology : Piezoelectric in shear
• Protection: IP68

• Sensibility :
  - 100 mV/g ±10%
  - 100mV/°C for 0-100°c (dual output version)
• Frequency response  : 0.8 Hz - 15 kHz (±10%)
• Dynamic scale : ±80 g, peak
• Time setting : 1 second
• Working temperature : -55 to 150°C (-67 - 302°F)
• Material : Stainless steel 316L
• Output :
  - Top of sensor (CMCP 788A)
  - On the side of the sensor (CMCP 787A)
• Connectors :
  - 2 pins MIL-C-5015
  - 4-pin M12
  - Polyurethane (PUR) sheathed cable
  - 5 meter cable, 2-wire with drain/shield
• Fixation : 1/4-28 UNF and M8x1,25 included
• Weight : 139g 788A version/185g 787A version
• Technology : Piezoelectric / shear
• Protections: IP65 / IP68 depending on the option

• Sensibility : 100 mV/g ±10%
• Frequency response  : 1.5 Hz - 10 kHz (±10%)
• Dynamic scale : ±60 g, peak
• Time setting : 2 seconds
• Working temperature : -55 to 130°C (-67 - 266°F)
• Material : Stainless steel 316L
• Output :
  - Top of sensor (CMCP 782A)
  - On the side of the sensor (CMCP 783A)
• Connectors : 2 pins MIL-C-5015
• Fixation : 1/4-28 UNF and M8x1,25 included
• Weight : 139g 782A version/185g 783A version
• Technology : Piezoelectric / compression
• Protection: IP68

Complete catalog of test bench fixings and accessories for all your applications.

Find all the Fixings and Accessories in the tab below "Attached documents".

FW-12/PW-4 is rotary wire terminal fixture with 1000N capacity. It enhances measurement efficiency by simply rotating the wheel to set samples of different sizes. It is designed for tension strength testing of crimped terminal.

GTW-2500N is self-centering vise grip with 2500N capacity for the vertical type test stand. It enables to fix the samples at the center due to self-centering design

P180-200N is 180 degree peel test fixture with 200N capacity. It is ideal for 180 degree peel test of adhesives such as tapes, glue, stickers

BT-500N/5000N/5000N-CB is 3-point bending test fixture with 500N/5000N capacity. It is suitable for 3-point bend test of flexural, rigid, semi-rigid samples such as metal plate or round bar form materials samples.

TKS-20N/250N is film puncture testing fixture with 250N capacity. It designed for puncture strength testing of thin samples including film with included table to fix the sample and pin to stick the sample.

Designed for puncture strength testing of thin samples including film

Contains table to fix the sample and pin to stick the sample for easy testing

Simple affordable type for low force and standard type available to meet your testing requirements

Custom-made solutions to suit your testing samples and requirements by changing material, size and capacity

Standard features:

• Force controlled non-destructive testing (destructive testing as well)
  - Maintain force between high/low setpoints
  - Increase force to high setpoint and stop
• Combination of screw drive system and high performance brushless motor provides extremely smooth and powerful operation over the entire speed range.
• Wide speed range: 0.4 – 11.5 in/min (optional speed ranges available)
• No programming required
• Newton, Lb and Kg units are selectable
• Accuracy: ±0.2% F.S. ±1 LSD
• USB, RS-232C, Digimatic and analog outputs

Standard features:

• SVL-220 Vertical Test Stand
• DST Digital Force gauge (many ranges available)
• GT-30 Vise Chuck or WG-300 Cam Grip (your choice)
• WG-1, WG-2, WG-3 Grip (your choice)
• Max Load: 220 Lb
• Outstanding accuracy of ±0.2% F.S. ±1 LSD
• Real time and peak mode (selectable)
• Newton, Lb and Kg units are selectable
• USB, RS-232C, and Digimatic outputs

Standard features:

• Straight-pull without bending or winding the test wire
• Lever action allows for rapid testing
• Horizontal positioning is easy to control
• Stroke 3.34″ (85mm)
• lbf, kgf, and Newton units are selectable
• RS-232C, Digimatic and analog outputs
• Runs on internal rechargeable batteries or AC adapter
• NIST Calibration Certificate included (ISO 17025 Certificate optional)

Standard Features:

• Test modes: Destructive and non destructive
• Force hold duration : up to 999 seconds in 1 second increments
• Color LED display
• Posibility to select digital speed: 10/25/50/100 mm/min
• Memory allows to save up to 26 test configurations
• Display is visible in the dark or bright sunlight
• Time and date stamp
• Choice of units: Lb, KG, and N1,
• 500 data memory for recall or download (RS-232C output)
• Kit includes, terminal grip, wire cam grip, ACT Logger data acquisition software, USB cable, calibration cert traceable to NIST

Attachment of different shapes and sizes, for various types of compression tests.

Disks:
- PC-5040 Φ40mm, PC-5060 Φ60mm,PC-5100 Φ100 mm

Rectangles:
- SQ-5030 30x20mm, SQ-5075 75x50mm, SQ-5150 150x100mm

Spheres:
- SP-5010 Φ10 mm, SP-5020 Φ20mm, SP-5030 Φ30mm

PR-500N/2500N is press test fixture with 2500N capacity. It is ideal for durability test of retort pouch or heat sealing packaging.

- PR-500N (500 N capacity)
- PR-2500N (2500N capacity)

Characteristics of the 45° Peel Tester :

- Maximum length of the sample 155 mm (6.1″), width 80 mm (3.14″)
- Speed: 0.4 to 12 inches/min is set digitally (speed ranges available as an option)
- The screw drive system and its high-performance brushless motor ensure smooth and powerful operation over the entire speed range.
- Manual, incremental and force control modes (with ZT's) are selectable.
- An easy-to-use menu selector dial allows you to choose mode, speed, dwell time and number of cycles.
- Force gauge units are selectable: Newton, lbf and kgf.
- Force gauge output: USB, RS-232C, Digimatic and analog outputs.∑

Characteristics of the 45° Peel Tester :

- Accessory dimensions: 10mm ~ 90mm
- Skin length: approx. 1″
- Speed: 0.4 to 12 inches/min is set digitally (speed ranges available as an option)
- The screw drive system and its high-performance brushless motor ensure smooth and powerful operation over the entire speed range.
- Manual, incremental and force control modes (with ZT series gauges) are selectable.
- An easy-to-use menu selector dial allows you to choose mode, speed, dwell time and number of cycles.
- Force gauge units are selectable: Newton, lbf and kgf.
- Force gauge output: USB, RS-232C, Digimatic and analog outputs.∑

CH-500N is terminal clamp jig with 500N capacity. It enables quick and easy sample setting by simply turning its knob to open the jaws and hooking the sample. It is designed to perform wire crimp pull test.

Urethane finger simulates the size and feel of a finger. Not suitable for touch screens
- 50N capacity
- 16mm diameter

WC-30 : 500 N (110 lbf) capacity

WC-2000 : 2000 (440 lbf) capacity

P90-200N is 90 degree peel test fixture with 200N capacity. It is ideal for 90 degree peel test of adhesives such as tapes, glue, stickers etc. It enables testings complying with the corresponding part of IEC, ISO, ASTM, JIS, etc. (only for P90-200N)

P45-50N is 45 degree peel test fixture with 50N capacity. It is ideal for peel test of packaging film especially in food and medical industries. 
- Sample height: 10 to 90mm
- Sample diameter: 20-140mm

XY-500N is XY-table with 1000N capacity. It is ideal for tension and compression testing of small samples such as PCB due to the ability to adjust sample position finely (every 0.8mm).
Travel on X, y: +/- 30mm

GTW-50L/50R is self-centering vise grip with 1000N capacity. Its self-centering design makes sample alignment easy. It is mountable to a vertical test stand for fixing samples.

Spring-loaded wire wedge grip automatically grips a wire sample at a consistent gripping force. 
The wedge design tightens the jaws as the wire is pulled. 
Opening width: 5mm. 
Capacity 500 N. 

KC-100/1001/5000 is wedge grip with 5000N capacity. It performs measurement accurately and easily due to its self-tightening wedge design.
It is ideal for tension testing of wire and cables.

- KC-100 (110 Lb capacity)
- KC-1001 (220 Lb capacity)
- KC-5000 (1100 Lb capacity)

High Capacity Pincer Wedge Grips are all purpose, spring-loaded, serrated jaw grips for tensile testing. High capacity pincer jaws have a capacity of 550 Lb and an M10 mounting thread.