CMCP 787A-788A : Advanced Industrial Piezoelectric Accelerometer ±80 g
- Sensibility :
- 100 mV/g ±10%
- 100mV/°C for 0-100°c (dual output version) - Frequency response : 0.8 Hz - 15 kHz (±10%)
- Dynamic scale : ±80 g, peak
- Time setting : 1 second
- Working temperature : -55 to 150°C (-67 - 302°F)
- Material : Stainless steel 316L
- Output :
- Top of sensor (CMCP 788A)
- On the side of the sensor (CMCP 787A) - Connectors :
- 2 pins MIL-C-5015
- 4-pin M12
- Polyurethane (PUR) sheathed cable
- 5 meter cable, 2-wire with drain/shield - Fixation : 1/4-28 UNF and M8x1,25 included
- Weight : 139g 788A version/185g 787A version
- Technology : Piezoelectric / shear
- Protections: IP65 / IP68 depending on the option
Log in to your account to display prices
Login
Login
The advanced CMCP 787A-788A is ideally suited to most types of rotary equipment where accuracy and repeatability are essential. This lightweight sensor can be used in both stationary and mobile applications. The sensor has been designed so that cross-wiring cannot damage internal components, while at the same time providing protection against potential ground loops. Sensitivities of 10mV/g, 30mV/g, 50mV/g, 250mV/g and 500mV/g are also available.
We offer 4 different connectors for your sensor:
- The MS connector of the CMCP 787A-788A allows the sensor to work with a separate cable set, like the CMCP602 series cables.
- The M12 connector of the CMCP 787A-788A-M12 allows the sensor to work with a separate cable set like the CMCP605M series cables.
- The CMCP 787A-788A-I is equipped with a fully shielded cable with an IP65 protection rating.
- The CMCP 787A-788A-IP series is equipped with a polyurethane (PUR) cable with IP68 protection rating (submersible).
- Sensibility :
- 100 mV/g ±10%
- 100mV/°C for 0-100°c (dual output version) - Frequency response : 0.8 Hz - 15 kHz (±10%)
- Dynamic scale : ±80 g, peak
- Time setting : 1 second
- Working temperature : -55 to 150°C (-67 - 302°F)
- Material : Stainless steel 316L
- Output :
- Top of sensor (CMCP 788A)
- On the side of the sensor (CMCP 787A) - Connectors :
- 2 pins MIL-C-5015
- 4-pin M12
- Polyurethane (PUR) sheathed cable
- 5 meter cable, 2-wire with drain/shield - Fixation : 1/4-28 UNF and M8x1,25 included
- Weight : 139g 788A version/185g 787A version
- Technology : Piezoelectric / shear
- Protections: IP65 / IP68 depending on the option
