this website uses cookies to ensure you get the best experience on our website.
close
Mode Layout
Theme color
Choose your colors
Background Color:
Active Color:
Reset

CMCP 793V-797V : Piezoelectric Speed Sensor

  • Sensitivity :
    - 100 mV/In/Sec or 4 mV/mm/Sec ±10%.
    - 500 mV/In/Sec or 20 mV/mm/Sec ±10% (version 500)
  • Frequency response: 2 Hz - 6 kHz (±3 dB)
  • Measuring range :
    - 40 In/Sec or 1.6 mm/Sec
    - 10 In/Sec or 0.4mm/Sec (version 500)
  • Response time: 1 second
  • Operating Temperature : -55 to 140°C
  • Exit :
    - On top of the sensor (CMCP 793V)
    - On the side (CMCP 797V)
  • Material: Stainless steel
  • Connector: 2-pin MS
  • Mounting: 1/4-28 UNF and M8x1,25 included
  • Weight: 125g (CMCP 793V) / 185g (CMCP 797V)
  • Technology: Piezoelectric shear technology
  • Protections: IP68
Log in to your account to display prices
account_circleSend to a friend
CMCP 793V-797V : Piezoelectric Speed Sensor

CMCP 793V-797V : Piezoelectric Speed Sensor

  • Sensitivity :
    - 100 mV/In/Sec or 4 mV/mm/Sec ±10%.
    - 500 mV/In/Sec or 20 mV/mm/Sec ±10% (version 500)
  • Frequency response: 2 Hz - 6 kHz (±3 dB)
  • Measuring range :
    - 40 In/Sec or 1.6 mm/Sec
    - 10 In/Sec or 0.4mm/Sec (version 500)
  • Response time: 1 second
  • Operating Temperature : -55 to 140°C
  • Exit :
    - On top of the sensor (CMCP 793V)
    - On the side (CMCP 797V)
  • Material: Stainless steel
  • Connector: 2-pin MS
  • Mounting: 1/4-28 UNF and M8x1,25 included
  • Weight: 125g (CMCP 793V) / 185g (CMCP 797V)
  • Technology: Piezoelectric shear technology
  • Protections: IP68

 

Piezoelectric speed sensors CMCP 793V-797V are measuring devices used to examine vibration signals in terms of speed (in/sec). The CMCP 793V-797V attenuates high frequency signals, which enables better measurement of low frequency vibrations. The CMCP 793V-797V sensor is essentially an accelerometer with an integration circuit that will produce an output relative to speed. The CMCP 793V-797V is the ideal accelerometer for use on most types of rotating equipment. The CMCP 793V-797V is lightweight and can be used for magnet or permanent mount applications. The sensor is designed so that cross wiring does not damage internal components and provides protection against ground loops. The CMCP 793V-797V is fully waterproof and can be cleaned with a water jet or submerged using a suitable extension cable such as the CMCP602 series.

The CMCP 793V-797V is stored in the industry standard of 100 mV/In/Sec sensitivity, an optional 500 mV/In/Sec version is available.
See data sheet for more details.