• Measurement ranges :
• - 1 N・m (Version CD-10M)
• - 10 N・m (Version CD-100M)
• Accuracy: ±0.5％
• Display: LCD
• Measuring direction: Clockwise and counter-clockwise
• Data storage: 800 values
• Measuring modes: Track, P-P (peak-to-peak), P-D (negative peak), C (real time output)
• Sleep mode: Every 10 minutes of non-use
• Charging time: 3hours
• Time of continuous use: 12 hours
• Weight: ~1kg
• Dimensions: 160 x 125 x 55 mm
• Screwing simulators: SJ10 (Version CD-10M), SJ50/SJ10K (Version CD-100M)
• Accessory: AC/DC Adapter

Low profil Custom Load Washer.
High Capacities : +/- 90 000 Lb (400 KN). 
Rated output : 1 mV/V.   
Non Linearity : 3 %. 
Central hole diameter : 2.04" [51.8 mm].
Material : Stainless Steel. 
Cable output.

Load Button Load Cell with TEDS, Special Full Circuit Gauge.
Capacities : +/- 100 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 0.15 %. 
Thread : #6-32.
IEEE1451.4 TEDS.
Material : Stainless Steel. 
Cable output with 7 pin 1.25mm Clik-Mate Molex Connector.

Custom High Tempeature/High Pressure Load Cell.
Capacities : +/- 100 Lb. 
Rated output : 1 mV/V.   
Non Linearity : 1 %. 
Media Pressure : 1800 PSI.
Operating Temperature : 60 to 500 °F (16 to 260 °C).
Material : Stainless Steel. 
Inconel Cable output with Lemo Plug (PHG.00.304).

• Measuring range : 5, 10, 25, 50, 100, 200 mm
• Sensitivity: 2 mV/V (0.5 - 5.5V optional)
• Linearity: ≤ ± 0.10 %.
• Spring force: 2 to 4N
• Material: Stainless steel
• Connector: M12 4-pin
• Operating temperature : -10 to 70°C
• Storage temperature: -20 to 80°C
• Protection: IP40

• Nominal displacement : 3 mm
• Sensitivity: 0.3 - 1.8V
• Linearity: ± 1%.
• Operating temperature : -10 - 70°C
• Storage temperature: -20 - 80°C
• Material: Aluminum and Stainless Steel
• Weight : 150g
• Dimensions: 20Ø x 40 mm
• Protection: IP40
• Quantities 10 pieces.

• Measurement ranges : 700, 2000, 3000 bar
• Operating temperature: 0 - 40°C
• Material: Anodized aluminum and stainless steel structure
• Dimensions :
  - 347 x 200 x 112 mm (GPM700)
  - 429 x 200 x 158 mm (GMP2000, GPM3000)
• Weight :
  - 6.3 kg (GPM700)
  - 14.6 kg (GPM2000, GPM3000)
• Ball valve for depressurization
• Transportation :
  - Briefcase
  - Sealing caps for the hydraulic system

Connects up to 4 sensors
Compatible with 4 or 6-wire sensors
Connector: Screw Terminals, 14-22 AWG
Material: Aluminum
Dimensions: 98 x 125 x 57 mm
Weight : ~600g
Protection: IP65 
Optional ATEX version available

Custom Donut Load Cell.
Capacities : +/- 1200 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 0.5 %. 
Central hole diameter : 0.98" [25 mm].
Thread : M6x1.
Material : Stainless Steel. 
Cable output.

QLA410: Custom Flange Style Thru Hole Load Cell.
Capacities : +/- 1600 Lb. 
Rated output : 1.5 mV/V.   
Non Linearity : 2 %. 
Central hole diameter : 48 mm.
Operating temperature : -60 to 200 °F (-51 to 93 °C).
Material : Stainless Steel. 
Cable output

Custom Dual Range Compression Load Cell.
Capacities : Ch1 - 1500 Lb, Ch2 - 3000 Lb. 
Rated output : 1.5 mV/V.   
Non Linearity : 1 %. 
Weight : 18 Lbs (8 kg).
Material : Stainless Steel. 
Cable output.

Custom Donut Load Cell.
Capacities : +/- 1000 Lb. 
Rated output : 4-20 mA.   
Non Linearity : 0.5 %. 
Central hole diameter : 2.615" [66.4 mm].
Amplifier option.
Material : Stainless Steel. 
Cable output

Custom Donut Load Cell.
Capacities : 10 000 N. 
Rated output : 1.5 mV/V.   
Non Linearity : 3 %. 
Central hole diameter : 2.84" [72 mm].
Material : Stainless Steel. 
Cable output.

Custom Donut Load Cell, Water Resistant.
Capacities : +/- 75 000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 3 %. 
Central hole diameter : 3.55" [90.2 mm].
Water Resistant.
Material : Stainless Steel. 
Cable output

Custom Donut Load Cell , Water Resistant.
Capacities : +/- 25 000 Lb. 
Rated output : 1.5 mV/V.   
Non Linearity : 2 %. 
Central Hole Diameter : 3.25" [82.6 mm].
Operating Temperature : -40 to 185 °F (-40 to 85 °C).
Water Resistant.
Material : Stainless Steel. 
 

Custom Compression Submersible Load Cell.
Submersible in 15 PSI of Non-Conductive Oil.
Capacities : +/- 15 000 Lb. 
Rated output : 2 mV/V.  
Non Linearity : 2 %. 
Operating Temperature : - 60 to 250 °F (- 51 à 121 °C).
Material : Stainless Steel. 

Custom Bending Beam Load Cell.
2 Mouting plan : Top and Side mount.
Capacities : +/- 18 Lb. 
Rated output : 1 mV/V.   
Non Linearity : 1 %. 
Weight : 0.13 Lbs (57 gr).
Material : Stainless Steel. 

Custom Reaction Torque and Thrust Flange to Flange Sensor.
Capacities : Fz - 3000 Lb, Mz - 1000 in-Lb. 
Rated output : 1 mV/V (Fz), 1 mV/V (Mz).   
Non Linearity : 0.5% (Fz), 0.25% (Mz).
Operating Temperature :  60 to 200 °F (-51 to 93 °C).
Central hole diameter : 1 1/2" [38.1 mm].
Material : Aluminum & Anodized Aluminum. 
Connector Output.

Custom Low Profile Torque & Thrust Sensor.
Capacities : Fz - 200 Lb, Mz - 200 in-Lb. 
Rated output : Fz 1 mV/V, Mz 2 mV/V.    
Non Linearity : 0.5 %.
Operating Temperature : -60 to 200°F (-51 to 93°C).
Material : Anodized Aluminum. 
Cable Output.

Custom Tri-Axial Load Cell.
Capacities : Fz - 300 N, Fy - 1200 N, Mz - 50 Nm.  
Rated output : 1 mV/V (Fy, Fz), 2 mV/V (Mz).   
Non Linearity : 1 %.
Operating Temperature :  -40 to 180°F (-42 to 82°C).
Thread : M6x1.
Material : Stainless Steel and Anodized Aluminum. 
10 Pin Lemo receptacle EGG.1B.310 Output.

Custom Tri-Axial Load Cell.
Capacities : Ch Fx - 1213 Lb, Ch Fy -  1213 Lb, Ch Fz - 1213 Lb. 
Rated output : 2.5 mV/V (Fz).   
Non Linearity : 1% (Fx, Fy), 2% (Fz)..
Material : Aluminum. 
Cable output.

Custom Torque/Thrust Bi-Axial Sensor.
Capacities : Fz - 2000 Lb, Mz - 150 in-Lb. 
Rated output : 2 mV/V (Fz), 0.5 mV/V (Mz).   
Non Linearity : 0.5 %.
Operating Temperature :  -65 to 160°F (-53 to 71°C).
Material : Anodized Aluminum. 
Cable Output.

Custom Torque and Thrust Thru Hole Bi-Axial Sensor.

Capacities : Fz - 100 Lb, Mz - 50 in-Lb.
Rated output : 2 mV/V.   
Non Linearity : 0.25 %.
Central hole diameter : 0.5" [12.7 mm].
Material : Stainless Steel. 
Cable output.

Custom Multi-Component Knee Joint Sensor.
Capacities : Ch Fx - 60 Lb, Ch Fz - 200 Lb, Ch My - 200 in-Lb. 
Rated output : 0.5 mV/V.    
Non Linearity : 1 %.
Material : Anodized Aluminum & Nickel. 
Cable x3 Output.

Custom High Temperature Tri-Axial Load Cell.
Capacities : Ch Fz - 6000 Lb, Ch Mx/My - 6000 in-Lb.  
Rated output : 1 mV/V nom (Fz), 0.5 mV/V nom (Mx,My). 
Non Linearity : ±1% (Fz), ±2% (Mx,My).
Operating Temperature :  Up to 350 F (-18 to 177 °C).
Material : Stainless Steel. 
High Humidity Resistant.
3x Ultimate 4 Pin receptacle.

Custom Dual-Axis Load Cell.

Capacities : Ch Fx - 500 N , Ch Fy - 500 N. 
Rated output : 2 mV/V.   
Non Linearity : 0.25 %.
Material : Stainless Steel. 
4 Pin Microtech Receptacle DR-4S-4.

Custom Bi-Axial Torque & Thrust Thru Hole Load Cell.
Capacities : Ch Fx - 200 N , Ch Fy - 200N. 
Rated output : 0.25 mV/V.  
Non Linearity : 0.1 %.
DB9 Male Connector.
Material : Anodized Aluminum. 

Multi-Axis Sensor that measures up to 6 different forces and torque, in 3 spatial directions and converts it into an electrical output signal.
Capacities : Ch Fx/Fy/Fz - 15 N, Ch Mx/My/Mz - 1 Nm.
Overload Protection.
Rated output : From 0.5 mV/V to 2.4 mV/V.   
Non Linearity : 0.25 %.
Operating Temperature :  -60 to 200°F (-51 to 93°C).
Dimensions : 1.96 in [50 mm OD] x 0.38 in [9.5 mm] ID x 0.43 in [10.8 mm] H.
Material : Aluminum. 

Custom Bi-Axial Shear Pin Load Cell.
Capacities : Ch Fy - 86.5 Klb, Ch Fz - 39.5 Klb. 
Rated output : 4 mV/V, Fy 3.5 mV/V Fz.   
Non Linearity : 2 %.
Diameter : 1.6234".
Connector: 10 Pin - PC02E-12-10P
Material : Stainless Steel and Nickel. 

Bi-Axial Handle Load Cell.
Capacities : Ch Fx- 200 Lb, Ch Fy - 200 Lb. 
Rated output : 1 mV/V. 
Non Linearity : 1 %.
Material : Stainless Steel. 

Custom Tri-Axial Bending Beam Load Cell with Triangular Bolt Pattern.
Capacities : Ch1 - 5 Lb, Ch2 - 5Lb, Ch3 - 5 Lb. 
Rated output : 3.3VDC.   
Non Linearity : 0.25 %.
Material : Anodized Aluminum. 
SPI Interface.
RoHS Compliant.

Custom Low Profile Beam Load Cell Designed for Laparoscopic Tool (MIS) Calibration/Verification.
Capacities : +/- 40 Lb. 
Rated output : 1.5 mV/V.   
Non Linearity : 1 %.
Operating Temperature :  -40 to 200 °F (-40 to 93 °C).
Height : 0.217" [5.51 mm].
Material : Stainless Steel. 
Cable Output.

Custom Cryogenic Donut Load Cell, Dual Bridge, Vacuum Compatible/Low Outgassing.
Capacities : Ch1 - 200 N, Ch2 - 200 N. 
Rated output : 1.5 mV/V.   
Non Linearity : 1 %.
Operating Temperature :  -112 to 158°F (-80 to 70°C).
Central hole diameter : 23.7 mm.
Material : Stainless Steel. 
Axial Cable Output.
ASTM E595 Compliant.

Custom Cryogenic Inline Load Cell, Vacuum Compatible/Low Outgassing.
Capacities : +/- 250 N. 
Rated output : 1.5 mV/V.   
Non Linearity : 0.5 %.
Operating Temperature :  -112 to 104°F (-80 to 40°C).
Thread : Female 1/4-28
Material : Stainless Steel. 
Cable Output.
ASTM E595 Compliant.

Cryogenic Compression Load Cell.
Perfect for space, aeronautical and medical applications.
Capacities : +/- 15 000 Lb. 
Rated output : 3 mV/V.
Operating temperature : -157°C to 66°C (-250 to 150 °F).  
Non Linearity : 3 %. 
Material : Stainless Steel. 
Cable Output.

• Measuring range : 1, 2.5, 5, 10 N
• Sensitivity: 2 mV/V (Option +/-5V or +/-10V)
• Linearity: 0.05%.
• Repeatability: 0.01%.
• Operating Temperature : -20 to +70°C
• Storage temperature: -20 to +80°C
• Protection: IP67
• Connection system: M12 5-pin
• Material: Stainless steel 
• Thread: M12
• Weight : 280g

• Measuring range : 1, 2, 5, 10 kN
• Sensitivity: 2 mV/V ( Ouput +/-5V ou +/-10V in option)
• Linearity: 0.05%.
• Repeatability: 0.01%.
• Operating Temperature : -20 to +70°C
• Storage temperature: -20 to +80°C
• Protection: IP67
• Connection system: M12 5-pin
• Material: Stainless steel 
• Thread diameter: M12 10.25mm 
• Weight : 280g

• Measuring range : 360°
• Resolution: 0.01°.
• Linearity: ±0.25°.
• Response time: ~0.3 sec
• Output: RS485 signal
• Operating Temperature : -40 to +85°C
• Storage temperature: -45 to +90°C
• Wiring: Shielded cable 1m, Ø 4.6 mm
• Dimensions: 67 X 54.8 x 21.6 mm
• Weight: ~110 grams

Custom Flange Style Thru Hole Load Cell.
Capacities : +/- 1000 Lb. 
Rated output : 3 mV/v.   
Non Linearity : 1 %. 
Dimensions : 2.13" [54 mm] ID x 4" [101.6 mm] OD x 0.38" [9.5 mm] H.
Material : Stainless Steel. 
Cable Output.

Available ranges : 1000 Nm or 2000 Nm.
Operation for the calibration of torque wrench.
Mechanical support equipped with a double linear guide for the calibration and the control of release or direct reading torque keys which allows the application of the load in a gradual and continuous way, by respecting the reference norm ISO 6789: 2017.
Block made of aluminium section.
Adaptable to all types of torque key.
Reduce the effort of the operator and allow to keep the torque applied constant by ensuring a better precision and repeatability of the measurements.