Custom Torque/Thrust Bi-Axial Sensor.
Capacities : Fz - 100 N, Mz - 2,5 Nm. 
Rated output : 1 mV/V (Fz), 1 mV/V (Mz).  
Non Linearity : 0.5 %.
Operating Temperature : -60 to 200°F (-51 to 93°C).
Material : Anodized. 
Cable Output.

Tri-Axial Load Cell (Fz, Mx, and My Loads). 
Mx & My : from 2 000 to 10 000 in-Lb. 
Fz : from 10 000 to 25 000 Lb. 
Rated output Mx & My : ± 0.5 mV/V, ± 2 mV/V
Rated output Fz : ± 2.5 mV/V, 4 mV/V.  
High Capacity. 
Material : Stainless steel, Anodized Aluminum.
Connectors outputs 6 Pin Bendix Receptacle, PT02A-10-6P. 

Tri-Axial Load Cell (Fz, Mx, and My Loads). 
Mx & My : from +/- 100 to 400 in-Lb. 
Fz : from +/- 250 à 1 000 Lb ou 5 000 Lb (à vérifier la doc me donne un doute). 
Rated output Mx & My : ± 0.75 mV/V. 
Rated output Fz : ± 1 mV/V (250, 500, 1 000 Lb), 2 mV/V (1 000 ou 5 000 Lb).  
High Capacity. 
Material : Stainless steel, Anodized Aluminum.
Connectors outputs 6 Pin Bendix Receptacle, PT02A-10-6P. 

Custom Micro Rotary Torque Sensor with Integrated TEDS. 
Capacities : +/- 1 Nm.  
Rated output : 2 mV/V.
Non Linearity : 0.1%.  
Operating Temperature : Up to 185 °C
Material : Aluminum & Stainless Steel. 
7 Pin Quick Disconnect Nano Receptacle output. 
RoHS Compliant.

Shackle Type  Dynamometer. 
Capavities : +/- 0.5,  1, 2, 3, ...,  200, 250, 300 Tonnes. 
Accuracy: ± 0.1% of full range. 
Safety factor for load cell: 5:1 - Hook: 4:1. 
Environmental: Weather proof IP67. 
Battery Life 2000 hours. 
Functions: Zero. Tare. Battery charge level. Max. (peak hold). Two-level overload visual alarms...

Shackle and Hook Type  Dynamometer. 
Capavities : +/- 0.5,  1, 2, 3, ...,  200, 250, 300 Tonnes. 
Accuracy: ± 0.1% of full range. 
Safety factor: 5:1. 
Environmental: IP65 (IP67 in option). 
Battery Life 2000 hours. 
Functions: Zero. Tare. Battery charge level. Max. (peak hold). Two-level overload visual alarms...

• Communication protocol :
• - TCP/IP 100BASE-TX (MG80-NE)
• - Ethernet/IP (MG80-EI)
• - PROFINET (MG80-PN)
• Transmission speed: 100 Mbit/s
• Functions: Resolution setting (0.1 to 10 µm), Reference point setting, Reset, Preset, Current value, Max value, Min value, Peak-to-peak value, Calculation function (2-axis addition and subtraction), Comparator.
• Mounting: 35 mm DIN rails

• Display : 7-inch LCD touch screen
• Display settings: 2 to 16 channels displayed
• Features: Measurement mode, Bar graph measurement, Alarm display, Reset, Preset. 
• Measurement Modes: Current, Max, Min, P-P
• Connectable modules: Up to 4 MG80-MA
• Calculations: Up to 16 addition/subtraction combinations per connected MG80-MA module

• Measuring range : +/- 3000, 5000 Nm
• Frequency range: 2.5 kHz
• Rotation speed: < 3.600 RPM
• encoder in option for speed or angle measurement
• Linearity: < ±0.5
• Output signal: 0...10 V, 4...20 mA, CAN-Bus or USB
• Operating Temperature : -40°C to +85°C
• Protection: IP50, IP65

• Measuring range : +/-10.000 Nm bidirectional
• Frequency range: 2.5 kHz
• Rotation speed : < 2.500 RPM
• Speed sensor 60CPR in option
• Linearity: < ±0.5
• Output signal: 0...10 V, 4...20 mA, CAN-Bus or USB
• Operating Temperature : -30°C to +85°C
• Protection: IP50, IP65

Nano Inline Thru Hole Load Cell Gen 3.
Capacities : +/- 5, 10 Lb. 
Rated output : 0.5 V/V.   
Non Linearity : 0.5 %. 
Option : RFID.
Thread : M1x0.25.
Material : Stainless Steel. 
RoHS Compliant.
4 Pin 0.5 mm Pitch Flex Cable with Radial Exit.

Thru Hole/Donut Load Cell with Welded Washer.
Capacities : +/- 1000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 1 %. 
Central hole diameter : 3.79" [96.3 mm].
Material : Stainless Steel. 
Cable output.

Thru Hole/Donut Load Cell with Welded Washer.
Capacities : +/- 1000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 1 %. 
Central hole diameter : 2.37" [60.2 mm].
Material : Stainless Steel. 
Cable output.

Thru Hole/Donut Load Cell with Welded Washer.
Capacities : +/- 1000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 2 %. 
Central hole diameter : 0.95" [24.1 mm].
Material : Stainless Steel. 
Cable output.

Thru Hole/Donut Load Cell.
Capacities : +/- 250, 500, 1000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 3 %. 
Central hole diameter : 1.47" [37.3 mm].
Material : Stainless Steel. 
Cable output.

Custom Donut Load Cell.
Capacities : +/- 20 000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 2 %. 
Central hole diameter : 2.0" [50.8 mm].
Operating Temperature : -40 to 160 °F (-40 to 71 °C).
Material : Stainless Steel. 
Cable output.

Thru Hole/Donut Load Cell.
Capacities : +/- 100 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 1 %. 
Central hole diameter : 1.0" [25.4 mm].
Material : Stainless Steel. 
Cable output.

Thru Hole/Donut Load Cell.
Capacities : +/- 30 000 Lb. 
Rated output : 2 mV/V +/- 1%.   
Non Linearity : 0.5 %. 
Central hole diameter : 1.79" [45.46 mm].
Material : Stainless Steel. 
Cable output.

Low Profile Custom Thru Hole/Donut Load Cell.
Capacities : +/- 5000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 2 %. 
Central hole diameter : 2 3/8" [60.3 mm].
Material : Stainless Steel. 
Cable output.

Custom Flange Mount Thru Hole Spindle Load Cell For NSK BSF1462 Ball Screw Bearing , Tension & Compression.
Capacities : +/- 2000 Lb. 
Rated output : ± 8 mA.   
Non Linearity : 1 %. 
Central hole diameter : 1.38" [35 mm].
Thread : M6x1.
Amplifier integrated.
Material : Stainless Steel. 
Connector 6 Pin Bendix PT02E-10-6P Output.

Flange Mount Thru Hole Compression Load Cell.
Capacities : +/- 15 000 Lb. 
Rated output : 12 mA.   
Non Linearity : 1 %. 
Central hole diameter : 2.91" [74 mm].
Thread : M6x1.
Amplifier integrated 4-16 mA.
Material : Stainless Steel. 
Connector Bendix PT02E-10-6P output.

• Analog Input : 0...10V; ±10V; 0...5mA; 4...20mA
• Sensor excitation 5...24 Vdc
• Digits: 4 or 6
• Character size: 100 or 125 mm (or 53mm 6-digit model only)
• Display : 
• - 999 to 9999 or -99999 to 999999
• - High brightness red or green LED
• - Tricolor LED
• Speed: Up to 40 measurements per second
• Units of measurement: Can be displayed on the last 2 digits of model 6
• Programming: Infrared remote control 
• Alarm signal: LED + relay
• Operating Temperature : -20 to 60°C
• Storage temperature: -20°C to 85°C
• Material: Black anodized aluminum
• Protection: IP64

Tension & Compression In-line Load Cell.
Capacities : +/- 3000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 2 %. 
Operating Temperature : -40 to 200 °F.
Material : Stainless Steel. 
Cable output.

Submersible Load Button Load Cell.
Capacities : +/- 1000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 0.5 %. 
Protection : IP67.
Material : Stainless Steel. 
Red Polyster Cable.

Special High Temperature & Hardness Load Button Load Cell.
Capacities : +/- 50 000 Lb. 
Rated output : 2.5 mV/V.   
Non Linearity : 2 %. 
Operating Temperature : 60 to 270 °F (15 to 132 °C).
Hardness Index : RC 56-60.
Material : 440C Stainless Steel. 
Cable output.

Non-Ferrous/Non-Magnetic Load Cell.
Capacities : +/- 250 Lb. 
Rated output : 2 mV/V | +/- 10%.   
Non Linearity : 0.25 %. 
Material : Beryllium Copper. 
Cable output.

Force Washer Load Cell.
Capacities : +/- 2000 Lb. 
Rated output : 0.8 mV/V.   
Non Linearity : 1 %. 
Central hole diameter : 1 3/4" [44.5 mm].
Operating Temperature : -60 to 212 °F (-50 to 100 °C).
Material : Anodized Aluminum. 
Cable output.

Force Washer Load Cell.
Capacities : +/- 2000 Lb. 
Rated output : 3 mV/V.    
Central hole diameter : 1/4" [6.35 mm].
Weight : 30g.
Material : Stainless Steel. 
Cable output.

Custom Compression Flange Mount Load Cell.
Capacities : +/- 100 Lb. 
Rated output : 2.5 mV/V.   
Non Linearity : 0.25 %. 
Central hole diameter : 9".
Material : Stainless Steel. 
Cable output.

Female Thread Rod End Load Cell.
Capacities : +/- 500 Lb. 
Rated output : 0.8 mV/V.   
Non Linearity : 0.5 %. 
Material : Aluminum. 
Cable output.

Custom Thru Hole/Donut Load Cell.
Capacities : +/- 5000, 10 000 Lb. 
Rated output : 3 mV/V.   
Non Linearity : 0.5 %. 
Central hole diameter : 26.4 mm.
Thread : 1 1/8-16.
Material : Stainless Steel. 
Cable output.

• Measurement ranges : 0.2 - 15; 0.2 - 20; 0.2 - 75; 2.0 - 120 N・m 
• Accuracy: ±0.5％
• Display: 4-digit LCD
• Measuring direction: Clockwise and counter-clockwise
• Lap counter: 1 to 99 (clockwise only)
• Alarm: LED and buzzer.
• Data storage: 800 values
• Measuring modes: Track, P-P (peak-to-peak), P-D (negative peak), C (real time output)
• Sleep mode: Every 10 minutes of non-use
• Charging time: 5h
• Time of continuous use: 12 hours
• Weight: 430g, 470g, 620g, 830g
• Calibration and traceability certificates included.

• Measurement ranges : 0.002 to 0.5 N・m
• Accuracy: ±0.5％
• Display: 4-digit LCD
• Measuring direction: Clockwise and counter-clockwise
• Lap counter: 1 to 99 (clockwise only)
• Data storage: 800 values
• Measuring modes: Track, P-P (peak-to-peak), P-D (negative peak), C (real time output)
• Sleep mode: Every 10 minutes of non-use
• Charging time: 3h
• Time of continuous use: 12 hours
• Weight: 180g
• Calibration and traceability certificates included.

• Measurement ranges : 0.02 to 4 N・m
• Accuracy: ±0.5％
• Display: 4-digit LCD
• Measuring direction: Clockwise and counter-clockwise
• Lap counter: 1 to 99 (clockwise only)
• Data storage: 800 values
• Measuring modes: Track, P-P (peak-to-peak), P-D (negative peak), C (real time output)
• Sleep mode: Every 10 minutes of non-use
• Charging time: 3h
• Time of continuous use: 12 hours
• Weight : 400g
• Calibration and traceability certificates included.

• Measurement range : 0.3 to 25 N・m
• Accuracy: ±0.5％
• Torque display: 4-digit LED
• Impact screen: 2-digit LED
• Measuring direction: Clockwise and counter-clockwise
• Impact measurement: 0 to 99
• Impact time measurement: 0.1 to 9.9 sec.
• Measuring modes: Track, P-P (peak-to-peak), P-D (negative peak)
• Charging time: 6 hours
• Time of continuous use: 8 hours
• Power off: Automatic after 5 minutes of non-use
• Weight: ~2.1kg
• Dimensions: 150 x 220 x 74 mm
• Screwing simulators: M10 soft, M10 rigid
• Accessories: AC/DC Adapter,Rechargeable Battery,Carrying Case, Inspection Report, Proofreading Certificate, Traceability System Figure.

Custom Fast Response Tension & Compression Load Cell.
Capacities : +/- 250, 500 Lb. 
Rated output : 3 mV/V.   
Non Linearity : 0.25 %. 
Thread : 1/2-20.
Material : Stainless Steel. 
6 Pin Bendix PT02E-10-6P Connector output.

Custom Square Flange Mount Thru Hole Load Cell.
Capacities : +/- 1000 Lb. 
Rated output : 2 mV/V.   
Non Linearity : 1 %. 
Central hole diameter : 1.38" [35 mm].
Material : Stainless Steel. 
RoHS Compliant.
Cable output.

Custom Non-Magnetic Compression Load Button Load Cell.
Capacities : +/- 250 Lb. 
Rated output : 1 mV/V.   
Non Linearity : 5 %. 
Non-Magnetic Compression Load Cell.
Material : Aluminum. 
Cable output.

Custom Miniature Shear Force Load Cell with integrated TEDS Recognition & Temperature Sensor.
Capacities : +/- 50 Lb. 
Rated output : 1 mV/V.   
Non Linearity : 0.1%. 
Thread : M2.5x0.45.
Material : Stainless Steel. 
RoHS Compliant.
Cable output.