Vibration & Velocity
Sensel Measurement offers a complete line of Piezo Velocity Sensors. Piezo Velocity Sensors are based on a Accelerometer but with an integration circuit onboard to produce a dynamic output in Velocity instead of Acceleration.
These sensors can solve low signal issues by providing a higher millivolt output. As the integration is performed internally where lower noise is present a cleaner signal is provided. For long wire distances they are provided with your choice of 100 or 500 mV per in/sec output.
Portable handheld vibration meters are designed for operations and maintenance personal, as well as inspectors to swiftly check the condition of rotating machinery. The devices comply to the ISO Standard for Industrial Machines.
- Speed ranges :
- - 0-1 In/Sec RMS or 0-25.4mm/Sec
- 0-2 In/Sec RMS or 0-50.8mm/Sec - Frequency response : 10 Hz - 1 kHz (±5%)
- Output current : 4-20 mA proportional to RMS value
- Sensor OK indicator: green LED
- Alarm indication: yellow LED
- Setting the delay time (0-60 seconds)
- Setting the alarm level (0-100% of full scale)
- Temperature range: -25 to 80°C (-13 to 176°F)
- Material : Stainless steel 316L and Plastic
- MTBF: 510 years
- Connector : 4 pin M12
- M8x1.25 adapters included (1/4-28 UNF optional)
- Weight: 116g
- Protections : IP67
- Quick set-up
- Easy to use
- Autonomy: 30 hours of continuous use at full charge
- Display: Backlit LCD
- Charger: 5V USB wall charger (included)
- Speed range: 0-8.0 In/S (0-203mm/s) RMS
- Frequency range: 10Hz to 1kHz (ISO standard) - Acceleration range: 0-20g's Peak
- Frequency range 1: 10Hz to 1KHz
- Frequency range 2: 10Hz to 15kHz - Displacement: 0-80 mils (2.032um)
- Frequency range: 10 to 500 Hz - Material: 5052 Aluminium - Anodized
- Tip: 316 stainless steel
- Dimensions: 156 x 23 x 12 mm
- English or metric units
- Conforms to ISO2372
- Lanyard, travel case, charger, storage bag and
- ISO 10816-1 Severity chart included
- Sensitivity :
- 100 mV/In/Sec or 4 mV/mm/Sec ±10%.
- 500 mV/In/Sec or 20 mV/mm/Sec ±10% (version 500) - Frequency response: 2 Hz - 6 kHz (±3 dB)
- Measuring range :
- 40 In/Sec or 1.6 mm/Sec
- 10 In/Sec or 0.4mm/Sec (version 500) - Response time: 1 second
- Operating Temperature : -55 to 140°C
- Exit :
- On top of the sensor (CMCP 793V)
- On the side (CMCP 797V) - Material: Stainless steel
- Connector: 2-pin MS
- Mounting: 1/4-28 UNF and M8x1,25 included
- Weight: 125g (CMCP 793V) / 185g (CMCP 797V)
- Technology: Piezoelectric shear technology
- Protections: IP68
- Sensitivity: 100 mV/g ±10%.
- Frequency response: 2 Hz - 2 kHz (±5%)
- Dynamic range: ±50 g, peak
- Speed ranges :
- 0-1 In/Sec RMS (0-25.4mm/Sec)
- 0-2 In/Sec RMS (0-50.8mm/Sec) - Temperature range: 0 - 100°C (temperature output option)
- Output current :
- 4-20 mA proportional to the RMS speed value
- 4-20 mA proportional to temperature RMS value (temperature output option) - Temperature range: -25 to 90° C
- Setting time: 3 seconds
- Material: Stainless steel 316L
- Connector: 18-24AWG (0.81 - 0.32mm2) Instrumentation Cable Twisted and Shielded Pair
- Mounting: M8x1.25 and 1/4-28 UNF included (optional adapters)
- Weight: 226g
- Technology: Piezoelectric in compression
- Protections: IP65
- Sensitivity :
- 1.00 In/Sec or 25.4 mm/Sec
- 2.00 In/sec or 50.8 mm/Sec - Frequency response: 10 Hz - 1 kHz (±5%)
- Dynamic range: ±50 g, peak
- Output current: 4-20mA proportional to RMS value or peak speed
- Setting time: 2 seconds
- Temperature range: -25 to 90°C
- Material: Stainless steel 316L
- Exit :
- On top of the sensor (CMCP 422VT)
- On the side of the sensor (CMCP 422VTS) - Connector :
- 2 pins MS 5015
- 4-pin M12
- Polyurethane (PUR) sheathed cable IP68
- 5 meter, 2-wire shielded cable with drain/shield - Mounting: 1/4-28 UNF and M8x1,25 included
- Weight: 150g 422VT version /185g 422VTS version
- Technology: Piezoelectric in compression
- Protections: IP65 / IP68 depending on the option