CMCP 422AT: Loop powered acceleration sensor 4-20mA
- Sensitivity: 1, 2, 5, 10g
- Frequency response: 10 Hz - 1 kHz (±5%)
- Output current: 4-20mA proportional to RMS value or peak acceleration
- Setting time: 2 seconds
- Temperature range: -25 to 90°C
- Material: Stainless steel 316L
- Exit :
- Top of sensor (CMCP 422AT)
- On the side of the sensor (CMCP 422ATS) - Connector :
- 2 pins MS 5015
- 4-pin M12
- Polyurethane (PUR) sheathed cable IP68
- 5 meter, 2-wire shielded cable with drain/shield - Mounting: 1/4-28 UNF and M8x1,25 included
- Weight: 150g version 422AT /185g version 422ATS
- Technology: Piezoelectric in compression
- Protections: IP65 / IP68 depending on the option
Log in to your account to display prices
Login
Login
The CMCP422AT are 4-20mA current loop powered acceleration sensors capable of interfacing directly with an analog input board of a PLC or DCS system. The 4-20mA output is proportional to the full speed range and is capable of transmitting signals over a long distance without signal loss. The MS connector option allows the sensor to operate with a separate cable set, such as the CMCP602 series cables.
We offer 4 types of connectors for your sensor :
- The MS connector option of the CMCP 422AT-C allows the sensor to operate with a separate cable set, like the CMCP602 series cables.
- The M12 connector of the CMCP 422AT-M12 allows the sensor to work with a separate cable set like the CMCP605M series cables.
- The CMCP 422AT-I is equipped with a fully shielded cable with an IP65 protection rating.
- The CMCP 422AT-IP series is equipped with a polyurethane (PUR) cable with IP68 protection rating (submersible).
- Sensitivity: 1, 2, 5, 10g
- Frequency response: 10 Hz - 1 kHz (±5%)
- Output current: 4-20mA proportional to RMS value or peak acceleration
- Setting time: 2 seconds
- Temperature range: -25 to 90°C
- Material: Stainless steel 316L
- Exit :
- Top of sensor (CMCP 422AT)
- On the side of the sensor (CMCP 422ATS) - Connector :
- 2 pins MS 5015
- 4-pin M12
- Polyurethane (PUR) sheathed cable IP68
- 5 meter, 2-wire shielded cable with drain/shield - Mounting: 1/4-28 UNF and M8x1,25 included
- Weight: 150g version 422AT /185g version 422ATS
- Technology: Piezoelectric in compression
- Protections: IP65 / IP68 depending on the option
